Input method doesn't work correctly in 4.0x
- Author
- Message
-
Offline
- Posts: 26
- Joined: Sun Mar 02, 2008 12:53 pm
Instructor
AkelPad doesn't process WM_IME_REQUEST messages well.
Unfortunately, in order for me to specify what specific problems there are, a bit of knowledge of actual languages and language-specific keyboards are needed. So, I won't hold my breath. But I am wondering if this can be fixed by just looking at the source code. Thanks.
AkelPad doesn't process WM_IME_REQUEST messages well.
Unfortunately, in order for me to specify what specific problems there are, a bit of knowledge of actual languages and language-specific keyboards are needed. So, I won't hold my breath. But I am wondering if this can be fixed by just looking at the source code. Thanks.
-
Offline
- Site Admin
- Posts: 6311
- Joined: Thu Jul 06, 2006 7:20 am
infimum
The very basic implementation of WM_IME_REQUEST (don't tested).
The very basic implementation of WM_IME_REQUEST (don't tested).
-
Offline
- Posts: 26
- Joined: Sun Mar 02, 2008 12:53 pm
Thanks for your try, but it doesn't work.
Let me briefly explain what the problem is. Please look at the very first post of this thread. You see 3 different "candidates" for the input (which is different from what appears in AkelPad, ie. "test" vs "sadsad," but let's assume they are the same). You press ENTER (or corresponding number keys) to finalize "transformation."
Now here is the trick. After finalization, there is a way to cancel it and display the candidates again. The way to do this is to select the part that you want to re-transform and hit a language specific key. This function doesn't work.
It's possible to remap this re-transformation to some non language specific key so that you can test it. But it's a bit complicated. So I end my post here for now and wait for your reply. (e.g. if you think it's possible to support this without knowing much about how IME functions.)
Let me briefly explain what the problem is. Please look at the very first post of this thread. You see 3 different "candidates" for the input (which is different from what appears in AkelPad, ie. "test" vs "sadsad," but let's assume they are the same). You press ENTER (or corresponding number keys) to finalize "transformation."
Now here is the trick. After finalization, there is a way to cancel it and display the candidates again. The way to do this is to select the part that you want to re-transform and hit a language specific key. This function doesn't work.
It's possible to remap this re-transformation to some non language specific key so that you can test it. But it's a bit complicated. So I end my post here for now and wait for your reply. (e.g. if you think it's possible to support this without knowing much about how IME functions.)
-
Offline
- Posts: 26
- Joined: Sun Mar 02, 2008 12:53 pm
I found a site (a little slow) useful for my explanation. Please read only Tip 2. The author assumes that readers have some knowledge of Japanese, so please ignore words written in Japanese (or Chinese characters). Since the exmaple picture is a bit complicated and cut off on the right side, I created a simpler example below.
Copy and paste ロシア連邦 (the words for the "Russian Federation") to Notepad.
Select 連邦 (the "Federation" part)
Now refer to Tip 2 and right click the selection and choose reconversion.
I hope this still works in your environment so that you can test it for AkelPad. It ideally should work on a keyboard. (No one likes to use mouse when typing so no need to implement this in ContextMenu plugin.) But this is just to give you an idea of what the problem is.
Copy and paste ロシア連邦 (the words for the "Russian Federation") to Notepad.
Select 連邦 (the "Federation" part)
Now refer to Tip 2 and right click the selection and choose reconversion.
I hope this still works in your environment so that you can test it for AkelPad. It ideally should work on a keyboard. (No one likes to use mouse when typing so no need to implement this in ContextMenu plugin.) But this is just to give you an idea of what the problem is.
-
Offline
- Posts: 12
- Joined: Tue Nov 10, 2009 11:14 am
-
Offline
- Posts: 12
- Joined: Tue Nov 10, 2009 11:14 am
I have uploaded it.
http://dx2.qiannao.com/servlet/FileDown ... 3/yong.rar
use "Embedded" mode:
.\imm\install.bat
run .\yong.exe
open akelpad
Language bar→yong
thanks!
http://dx2.qiannao.com/servlet/FileDown ... 3/yong.rar
use "Embedded" mode:
.\imm\install.bat
run .\yong.exe
open akelpad
Language bar→yong
thanks!
-
Offline
- Posts: 12
- Joined: Tue Nov 10, 2009 11:14 am
"xiaoxiao" is a plug-type input method, just click yong.exe to run, but you want to use "Embedded" mode, it should be reg yong.dll files:
1. into imm directory, run install.bat, the language bar will be more of a "yong" options
2.run yong.exe
3.open akelpad
4.Language bar → yong
If successful, to akelpad input, akelpad floating on the input box will appear, then press the space bar before getting on the screen, rather than directly on the screen in akelpad.
Ps: I do not know Russian, and my English is poor, the above is a Google translation of the content, and wish you could understand it.
haha
1. into imm directory, run install.bat, the language bar will be more of a "yong" options
2.run yong.exe
3.open akelpad
4.Language bar → yong
If successful, to akelpad input, akelpad floating on the input box will appear, then press the space bar before getting on the screen, rather than directly on the screen in akelpad.
Ps: I do not know Russian, and my English is poor, the above is a Google translation of the content, and wish you could understand it.
haha
-
Offline
- Posts: 12
- Joined: Tue Nov 10, 2009 11:14 am
I'm sorry, give you trouble
I made a video screen
http://justupit.com/files/0O3RFBTJ/Embedded.rar
Select from the language bar "yong" to start the input method, which is the most critical step
I made a video screen
http://justupit.com/files/0O3RFBTJ/Embedded.rar
Select from the language bar "yong" to start the input method, which is the most critical step