Log plugin
- Author
- Message
-
Offline
- Posts: 3217
- Joined: Wed Nov 29, 2006 1:19 pm
- Location: Киев, Русь
- Contact:
-
Offline
- Posts: 33
- Joined: Wed Apr 13, 2011 8:59 am
-
Offline
- Posts: 3217
- Joined: Wed Nov 29, 2006 1:19 pm
- Location: Киев, Русь
- Contact:
В диалоге настроек появилось поле "Псевдоним для темы Coder", что здорово)
Прошу сделать, чтобы если псевдоним не указан, то брать текущую из программы. Это для того, чтобы иметь возможность переключать из одного места (на уровне программы).
Добавлено: или может быть какое-то ключевое слово, которое если вписываешь в поле, то оно начинает брать установленную в программе тему.
Прошу сделать, чтобы если псевдоним не указан, то брать текущую из программы. Это для того, чтобы иметь возможность переключать из одного места (на уровне программы).
Добавлено: или может быть какое-то ключевое слово, которое если вписываешь в поле, то оно начинает брать установленную в программе тему.
-
Offline
- Site Admin
- Posts: 6311
- Joined: Thu Jul 06, 2006 7:20 am
Изменено: требуется AkelPad 4.8.7 или выше.
Changed: required AkelPad 4.8.7 or higher.
Log plugin v3.7
Changed: required AkelPad 4.8.7 or higher.
Log plugin v3.7
-
Offline
- Posts: 1250
- Joined: Thu Nov 16, 2006 11:53 am
- Location: Kyiv, Ukraine
Напишу ещё сюда: наткнулся на проблему то ли с SearchReplace.js, то ли с плагином Log:
viewtopic.php?t=1692&start=92
Воспроизводится и на рабочем, и на домашнем компьютере.
viewtopic.php?t=1692&start=92
Воспроизводится и на рабочем, и на домашнем компьютере.
-
Offline
- Site Admin
- Posts: 6311
- Joined: Thu Jul 06, 2006 7:20 am
Добавлено: флаг 128 во внешний вызов с кодом 1 - закрыть панель вывода, если код возврата приложения равен нулю.
Added: flag 128 to external call with code 1 - close output panel, if application exit code equal to zero.
Log plugin v4.0
Added: flag 128 to external call with code 1 - close output panel, if application exit code equal to zero.
Log plugin v4.0
-
Offline
- Posts: 60
- Joined: Tue Aug 21, 2012 11:17 am
- Location: UK
Akelpad+Log plugin (x64 version) crashes upon pressing F4
Well, the subject already says it all: I run a makefile via the Log command dialog box, the output panel is duly filled and when I press F4 to jump to the first error line (MSC error format selected) AP vanishes in a small cloud of smoke;-)
(Freshly downloaded and installed 4.9.0 without any changes on Win7 x64.)
(Freshly downloaded and installed 4.9.0 without any changes on Win7 x64.)
-
Offline
- Site Admin
- Posts: 6311
- Joined: Thu Jul 06, 2006 7:20 am
Does it happens on development version and last version of the Log plugin - 4.1? If yes, can you send or upload AkelPad folder.
-
Offline
- Posts: 60
- Joined: Tue Aug 21, 2012 11:17 am
- Location: UK
This version still crashes when I first press F4 after executing a make or otherwise fill the Log output panel. It doesn't crash when I start AP and immediately press F4.Instructor wrote:tmsg
Test version for x64
(As the zip only contains the x64 exe, I've tested it with the 4.9.0 version of the Log .dll.)
-
Offline
- Posts: 60
- Joined: Tue Aug 21, 2012 11:17 am
- Location: UK
I sure can do that but this simply contains a freshly downloaded full 4.9.0 x64 version plus the AP .exe you just posted. The only changes I did after install was not storing the options in the registry and enabling F9 for editing the Log command dialog; other than that it's the plain downloaded version.Instructor wrote:If yes, can you send or upload AkelPad folder.
So I don't really see the point of uploading.